I'Ve got the hood popped i'm. Going to open it right here, throw the prop rod up right, quick! The grille has to come out first before i can remove that front fender. Now, if you want to know how to do that, i've already posted a separate video. All about that. So make sure you check it out anyway, i've already removed the fasteners that need to come out, so this inner piece pops right out just like that and the grill easy as pie. Okay, so with all of that stuff, out of the way we can remove some more hardware, these load, bearing trail sites, need to come off and they are held in place by three different fasteners. So just take your 10 millimeter socket and ratchet and remove those they're pretty easy to get to right underneath here, Music there we go one more to go here. So, with the trail sight removed, we've got three more 10 millimeter bolts right on top of the fender. Here to take out so i'm gon na do that next now, i'm down at ground level, because we've got to remove these fender flares, which is surprisingly easy. Ford has provided five different clips, but they're very simple, they're just little latches. You turn them about a quarter. Turn just like that and the fifth one there once you've, undone those latches the whole flare, should pop right off from the fender Music. Okay, next step, you didn't lose that 10 millimeter socket.
Did you i'm always misplacing it, but you need it because we got two bolts to take out right here at the very bottom of the fender, where it ties into the rest of the body Music. So we've got to do a little bit more work up front. This lower trim piece has to come off and it should just clip into place hand hold on it. There we go and i'm gon na just work. It off work it right down the line here. It'S on there tight. You don't want this coming off when you're on the trail, all right now that that trim piece is out of the way we've got three eight millimeter bolts to remove, which will take off this black plastic piece. Then there's a 10 mil right behind that Music and as promised the 10 mil so up top here, we've got trust. Me we're almost done a seven millimeter bolt right here by the side view mirror, which i'll take out with another handy dandy, nut driver out. It comes just like that there we go with that. Out of the way we've got some more panel clips to take out. I think there are four of them: Music. Okay, so aside from one other 10 millimeter bolt down here, which we've already removed, this fender should be ready to come right off the vehicle. So if i pull down pull out on the bottom and down just a little bit, it should lift look at that.
It comes right off very cool stuff. There you go that's how you remove the front fenders on a 2021 ford, bronco i've got to say not the easiest task in the world, but again not overly difficult. Just take your time, and it only requires a few basic hand tools so just about anyone should be able to do this anyway. Thank you so much for watching this video and if you love the new ford bronco, which i know you do, we've got a whole bunch of other videos with this particular example. Here, where i show you how to take the doors off, remove the grill and a whole bunch more so make sure you give those a watch thanks for watching and i'm gon na see.